Structural repair of concrete

MasterEmaco S 560 FR / ЕМАСО S170 CFR

MasterEmaco S 560 FR / ЕМАСО S170 CFR

Fast-hardening non-shrink dry mixture is thixotropic of the type with flexible chrome-Nickel and polymer fiber, designed for structural repair of concrete and reinforced concrete. The coating thickness from 20 up to 60 mm

MasterEmaco S 550 FR / ЕМАСО S150 CFR

MasterEmaco S 550 FR / ЕМАСО S150 CFR

Fast-hardening non-shrink dry mixture inlet type, containing a flexible metal and polymer fiber. To restore the bearing capacity of reinforced concrete constructions without additional reinforcement. The thickness of pouring is from 20 mm up to 60 mm

MasterEmaco S 540 FR / ЕМАСО SFR

MasterEmaco S 540 FR / ЕМАСО SFR

Fast-hardening non-shrink dry mixture filling-tion type containing polymer and steel ethnisierung fibre. For repair of concrete structures exposed to dynamic and impact. The coating thickness from 20 up to 60 mm

MasterEmaco S 488 / ЕМАСО S88C

MasterEmaco S 488 / ЕМАСО S88C

Thixotropic, shrinkage compensated repare mortar for reprofiling concrete structures according to EN 1504-3, for thickness 6–40 mm.

MasterEmaco A 640 / MACFLOW

MasterEmaco A 640 / MACFLOW

Plasticized expanding cement Macflow, is a mixture of Portland cement and complex additives, betraying plasticizing and expanding the properties and regulate them.

MasterEmaco S 5450 PG / EMACO NanoCrete R4 Fluid

MasterEmaco S 5450 PG / EMACO NanoCrete R4 Fluid

MasterEmaco S 5450 PG is a single component, extra high strength, high modulus, and shrinkage compensated structural repair mortar that meets the requirements of the
new European Norm EN 1504 part 3 class R4. MasterEmaco S 5450 PG is a ready-to-use material that contains sulphate resistant Portland cement (HSR LA), hydraulic binders, well graded sands, specially selected polymer fibres (PAN – polyacrylonitryl) and special
additives to significantly reduce the risk and incidence of shrinkage cracking.

MasterEmaco S 5300 / EMACO NanoCrete R3

MasterEmaco S 5300 / EMACO NanoCrete R3

MasterEmaco S 5300 is a single component, lightweight, polymer modified, high build structural repair mortar with active corrosion inhibition. MasterEmaco S 5300 has been specifically formulated to produce a mortar with the compressive strength and modulus characteristics defined in class R3 of EN 1504 part 3.

MasterEmaco S 5400 / EMACO NanoCrete R4

MasterEmaco S 5400 / EMACO NanoCrete R4

MasterEmaco S5400 is a single component, extra high strength, high modulus, shrinkage compensated structural repair mortar that meets the requirements of the new European Norm EN 1504 part 3 class R4. MasterEmaco S5400 is a ready to use material that contains Portland cement hydraulic binders, well graded sands, specially selected polymer fibres (PAN polyacrylonitryl) and special additives to significantly reduce the risk and incidence of shrinkage cracking. When mixed with water, MasterEmaco S5400 forms a highly thixotropic mortar that can easily be spray or trowel applied.

MasterEmaco S 466 / ЕМАCО S66

MasterEmaco S 466 / ЕМАCО S66

MasterEmaco S 466 is a high strength precision concrete, requiring only the on-site addition of water to provide a free flowing concrete ideally suited for placing in nominal thicknesses of 40mm and above. When mixed, applied and cured in accordance with the manufacturers instruct

MasterEmaco S 488 PG / ЕМАСО S88

MasterEmaco S 488 PG / ЕМАСО S88

MasterEmaco S 488 PG is a pre-bagged ready-to-use structural repair mortar in powder form. When mixed with the correct amount of water, it produces a thixotropic, high strength repair mortar, reinforced with acrylic polymer fibre. It possess excellent bond characteristics to steel reinforcement and to concrete.

MasterEmaco T 1100 TIX / EMACO Fast Tixo

MasterEmaco T 1100 TIX / EMACO Fast Tixo

MasterEmaco T 1100 TIX is a pre-bagged, ready-to-use, fast setting and hardening thixotropic repair and bedding mortar. The product, with specially selected fine aggregates, a special cement binder system and active chemical substances, provides rapid strength build-up – even at sub-zero temperatures – improved durability and un-matched, low drying shrinkage.

MasterEmaco T 1400 FR / EMACO Fast Fibre

MasterEmaco T 1400 FR / EMACO Fast Fibre

MasterEmaco T 1400 FR is a pre-bagged, ready-to-use, fast setting and hardening flowable repair and road / joint nosing mortar. The product, with specially selected fine aggregates, a special cement binder system and active chemical substances, provides rapid strength build-up – even at sub-zero temperatures – improved durability and un-matched, low drying shrinkage.

MasterEmaco Т 545 / EMACO T545

MasterEmaco Т 545 / EMACO T545

MasterEmaco T545 is a one component concrete repair and anchoring material which sets in 15 minutes and will accommodate rubber-tyre traffic 45 minutes after placement. This product bonds to both concrete and masonry and can be used indoors and outdoors for highway and heavy industrial repair jobs.

MasterEmaco T 1100 TIX / EMACO Fast Tixo G

MasterEmaco T 1100 TIX / EMACO Fast Tixo G

MasterEmaco T 1100 TIX is a pre-bagged, ready-to-use, fast setting and hardening thixotropic repair and bedding
mortar. The product, with specially selected fine aggregates, a special cement binder system and active chemical substances, provides rapid strength build-up – even at sub-zero temperatures – improved durability and un-matched, low drying shrinkage.

MasterEmaco T 1200 PG / EMACO Fast Fluid

MasterEmaco T 1200 PG / EMACO Fast Fluid

MasterEmaco T 1200 PG is a pre-bagged, ready-to-use, fast setting and hardening ourable repair and bedding mortar. The product, with specially selected fine aggregates, a special cement binder system and active chemical substances, provides rapid strength build-up – even at sub-zero temperatures – improved durability and un-matched, low drying shrinkage.

logo-footer-en

© ГМ-Самара 2014 г.