Non-structural repair of concrete

MasterEmaco N 900 / ЕМАCО 90

MasterEmaco N 900 / ЕМАCО 90

MasterEmaco N 900 is a factory controlled blend of hydraulic binders, well graded sand, redispersible spray-dried polymers and polyacrylonitril fibres. MasterEmaco N 900 contains suplhate resitant cement and has a low chromate content of (Cr-VI) < 2 ppm. Mixed with water it provides a polymer modified, fibre reinforced thixotropic render, for the waterproof finishing of concrete. MasterEmaco N 900 can be applied by trowel or spray and cures to a rich light grey colour.

MasterEmaco N 5200 / EMACO NanoCrete R2

MasterEmaco N 5200 / EMACO NanoCrete R2

MasterEmaco N 5200 is a universal, single component, polymer modified, fast setting, repair, reprofiling and levelling mortar. MasterEmaco N 5200 is a ready-to-use material that contains special cements, well graded sands, carefully selected polymers and fibres to reduce shrinkage and improve physical and application properties. When mixed with water, it forms a mortar with an exceptional wide range of applications. MasterEmaco N 5200 can easily be hand or trowel applied in thicknesses from 3 up to 100 mm.

MasterEmaco N 5100 TIX / ЕМАCО NanoCrete FC

MasterEmaco N 5100 TIX / ЕМАCО NanoCrete FC

MasterEmaco N 5100 TIX is a single component, polymer modified, fast setting levelling mortar for finishing of repair works. MasterEmaco N 5100 TIX is a ready-to-use material that contains special cements, well graded sands, carefully selected polymers and fibres to reduce shrinkage and improve physical and application properties. When mixed with water, it forms a mortar with a very fine creamy consistency. MasterEmaco N 5100 TIX can easily be trowel applied in thicknesses from 0.5 mm (blowhole filling) up to 7 mm. Small patch repair areas can be reprofilled up to 10 mm thickness.

logo-footer-en

© ГМ-Самара 2014 г.