Simple solutions for Waterproofing

Waterproofing of concrete and reinforced concrete is an important stage during new construction, and repair of operated buildings and structures for civil and industrial purposes. Its arrangement thus becoming one of the most important tasks. Currently presents many solutions of protection of concrete from destruction due to external influences. Accordingly, it is necessary to choose it, how it will be made waterproofing. BASF - wide range of products for protection of concrete. Vysokokachestvennoj waterproofing will eliminate the problem of penetration of water once and for all. Thus, the necessity of the work each season just will not occur. A wide range of products waterproofing BASF, beginning and ending of a one component systems will allow you to find the solution of tasks connected with waterproofing of structures from exposure to the environment.
MaterSeal 912

MaterSeal 912

MasterSeal 912 is a one component, moisture curing pre-polymer which is reswellable when in contact with water, suitable for the permanent sealing of construction joints in concrete structures.

PCI Polyfix 30 Sek

PCI Polyfix 30 Sek

Cures after approx. 30 seconds, rapid prevention of water escape.
High bending tensile and compressive strength, can be exposed to foot and vehicular traffic.
Impermeable to water.
Resistant to weathering and frost, multi-purpose use indoors and out.
Easy to apply, to be mixed with water only.
Free of chloride, does not cause any corrosion to steel.

PCI Polyfix 5 min

PCI Polyfix 5 min

For indoor and outdoor use.
Mounting of machines, motors, door frames, windows, bolts, banisters, railings for balconies and bridges, ducts etc.
To fasten steel posts, brackets for window sills and radiators etc.
To fix dowels for prefabricated elements, suspension ceilings and installation of shelves, cabinets etc.
To smooth voids, holes (e.g. after injection of cracks) and gaps.

MASTERSEAL 531

MASTERSEAL 531

A single component waterproof coating suitable for contact with potable water, was spray applied to the internal walls of the reservoir for faster, more uniform application.

MASTERSEAL 501

MASTERSEAL 501

The MASTERSEAL 501 waterproofing system ensures the total and permanent solution to water leakage, ingress, or seepage in concrete structures or any cementitious substrate. The formation and development of insoluble crystals into water bearing capillaries and interstices effectively blocks the further passage of water and ensures permanent water tightness for the life of the structure

MASTERSEAL 550

MASTERSEAL 550

MasterSeal 550 is an acrylic-modified, Portland cement-based flexible waterproofing membrane for concrete and masonry. Use it above or below grade on interior or exterior surfaces.

MASTERSEAL 588

MASTERSEAL 588

MASTERSEAL 588 is a two component, ready-to-use, elastomeric coating based on special synthetic resin dispersions and a blend of selected cements and quartz sand with a special grading.

MasterProtect H 321

MasterProtect H 321

MasterProtect H 321 is a single component, clear, penetrating water repellent which provides weatherproof protection for vertical surfaces such as clay, brick, sandstone or mineral render.

PC mix Tixo

PC mix Tixo

Fine-grained dry concrete mix thixotropic type with increased resistance to cracking. Paving thickness from 20 to 40 mm

PCI Pecitape WS

PCI Pecitape WS

Base material butyl rubber, therefore ductile.
Self-adhesive, therefore simple and reliable working.
High bond to clean substrates.
Immediately functional, therefore rapid workflow.
Fields of application:
For indoor and outdoor use.
For walls and floors.
For wet areas with non pressurised water such as showers in residential buildings, hotels, senior citizen homes and hospitals.
For outer areas, e.g. balconies and terraces.
n combination with the bonded waterproofing PCI Lastogum, PCI Seccoral 1K/2K Rapid, PCI Apoflex F/W, the polyurethane adhesive PCI Collastic and the waterproofing membranes PCI Pecilastic W and PCI Pecilastic WS.

PCI Zementschleier-Entferner sauer

PCI Zementschleier-Entferner sauer

For indoor and outdoor use.
For walls and floors.
o remove cement film, mortar droppings and residues of lime.
For all surfaces insensitive to acids such as ceramic tiles as well as terracotta flags.
Colour: red-colourless
Packaging: 5-l-canister/ 2,50-l-canister/ 1-l-bottle

logo-footer-en

© ГМ-Самара 2014 г.